Running a salon can be hectic at times, especially within the busy seasons, so ensuring your salon runs smoothly should be of up-most importance, together with the ability to utilise your tanning rooms as effectively as possible to obtain maximum revenue.

J-Suns cater for this by offering the T-Max management control and timing system, giving you total peace of mind that your salon runs at optimum performance, every day!

The T-Max system is adaptable to suit all salons, however big or small, so you only need pay for the system that best suits your requirements. The T-Max system is also very expandable, so it can grow as does your business.

We Always Use The most Up-To Date T-Max Technology Available

T-Max Manager Pro:
The T-Max Manager Pro is a front desk control unit for the T-Max 3A and T-Max 3A Intercom Timers. It can be connected to up to 64 T-Max 3A's and/or T-Max 3A Intercoms to control up to 128 tanning units in a single salon. It also works with T-Max 3A compatible tanning beds. The T-Max Manager Pro has 64 dual-colored lights showing bed status. A 16x2 easy to read Vacuum Fluorescent Display (VFD) also shows the status of a given bed. A 16 key keypad allows for manual session control. The T-Max Manager Pro can be used manually or be controlled with a PC using today's most popular tanning software. Up to eight T-Max Manager Pro and/or T-Max Managers can be connected to a single salon.

T-Max 3A:
The T-Max 3A can operate as a stand-alone timer. Up, Down, and Start/Stop buttons allow for easy control of your tanning bed. Terminals that screw down provide flexible and easy wire connections. All parameters, such as lamp hours, session counts, bed hours, etc. can be accessed and changed right on the T-Max 3A. All these features provide an easy to install and inexpensive way to control a tanning bed from the front desk of your salon. Up to eight T-Max Manager Pro and/or T-Max Managers can be connected to a single salon.

T-Max Intercom Master:
No more yelling down the hall! Communications are made easy with the T-Max Intercom Timer system. The T-Max Intercom Master is used in conjunction with the T-Max Manager Pro and T-Max Intercom Timers. The T-Max Intercom Master is used to send and receive messages to the T-Max 3A Intercom Timers in each salon room.

T-Max Monitor Plus:
The T-Max Monitor/Plus is a device that connects anywhere in the T-Max Series and displays the time and status of up to 16 beds. Sixteen two-digit LED displays show the time remaining for active sessions in minutes. The T-Max Monitor/Plus also shows the clean room and cool-down statuses. A dip-switch allows the salon owner to select which bank of 16 displays the T-Max Monitor/Plus is displaying; beds 1-16, 17-32, 33-48, 49-64, 65-80, 81-96, 97-112, and 113-128. You can connect as many T-Max® Monitor/Pluses in a single salon as you like.

T-Max 3A Intercom:
The T-Max 3A Intercom is the first digital timing system for the tanning industry with a built-in intercom. It has all the same great features as the regular T-Max 3A timer with the digital intercom system built right in for ease of communication. Use the T-Max 3A Intercom timer with T-Max Intercom Master and T-Max® Manager Pro. Any room can call the front desk and the front desk can call any room.

T-Max Manager:
The T-Max Manager is a front desk control unit for the T-Max 3A timers. It can be connected to up to 64 T-Max 3A's to control up to 64 tanning units in a single salon. It also works with T-Max 3A compatible tanning beds. The display consists of 8, two-digit LED's along the top of the T-Max 3A Manager including a Start/Stop and Set button below each display. A vertical row of 8 LED's indicates which bank of eight beds are being displayed. The T-Max Manager can be used manually or be controlled with a PC using today's most popular tanning software. Up to eight T-Max Managers and/or T-Max Manager Pro's can be connected in a single salon.